|
|
Joined: May 2000
Posts: 2,534
Great Green Arkleseizure
|
|
Great Green Arkleseizure
Joined: May 2000
Posts: 2,534 |
Let's say Meridian was purposely setting max at -3db. Isn't that just a one-bit reduction in the digital domain. Since Meridian resolution enhances to 24-bit, are we hearing the difference between 23 and 24 bits.
561, DSP5500s, DSP5000C, analog sides and rears
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
You're not ADDING +3dB you are SETTING them to +3dB (which is exactly 0x26 [no more no less]). You are "adding" to other channels so they are relativly correct with respect to fronts (so they measure all the same with an SPL meter).
Trifield has never sounded better.
I used to be torn over how good Direct wired sounded and how much Trifield added but G68 lost some detail. Now I have both.
Your center is pretty far away from the mains (if I recall) so I don't think you want to set all 3 to +3dB just the L/R and then adjust center accordingly.
I'd say if your center is within 1dB I'd just set it to +3dB. But if it's further I would not.
If you don't set center to exactly +3dB (because it's to far from mains) then don't worry about changing Trifield center back to +0dB. Leave it -3dB like you had it.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Mar 2010
Posts: 147
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2010
Posts: 147 |
Okay George so just to confirm here:
My Center is close to my LR and exact same distance away from sweet spot at 3x 11'6".
Currently my Center is -3.0db because it is too forward sounding in Trifield and the LR 8Ks are set to Large while Center is set to Small.
Are you saying that I can do your tweak to the LR and then set the Center at 0.0db and I get this improvement? My thinking was to set your tweak across all three and then pull back on the center by -3 but this will be a wash and if so then just doing LR will be sufficient.
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
If your front 3 are close then yes set them all to +3dB. Do what ever you want with Trifield Center. Try Trifield Center both ways (what a concept  ). Create a Trifield Copy with one set to -3dB and the other 0dB. Then create a phantom with a Default of the new Trifield. Then toggle between them on the Remote. I think you'll find things are different after applying this "tweak".
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
Let's say Meridian was purposely setting max at -3db. Isn't that just a one-bit reduction in the digital domain. Since Meridian resolution enhances to 24-bit, are we hearing the difference between 23 and 24 bits. I believe 3dB is .5 bits. Partial bits are bad. Which I believe is what Meridian's Hybrid Volume tries to AVOID !!! http://en.wikipedia.org/wiki/Audio_bit_depth
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Mar 2010
Posts: 147
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2010
Posts: 147 |
Okay so I applied the tweak to L and R and kept Center at 0.0db (but took off the -3.0db in Trifield).
Where do I send the check?
The sound is brighter not louder (after you factor in volume) and as such there appears to be more resolution now.
Now what I may do is add the tweak to the center and in DSP presets drop the center back down to -3db since other settings keep the center at 0.0db! Duh.
EDIT: AND SO now across all three tweaked DSPs seems like there's resolution enhancement and detail gains. The volume must obviously be lower.
How to set the bass -2.5 for all speakers via mconfig (since this must be done manually right now)?
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
I would set front 3 to +3dB and leave Presets as you had them (and experiment with presets while listening).
That way Movies will be right (which I assume you didn't offset the center on).
You want speaker calibration to say they are all equal (or near equal) we are not breaking that rule (slightly bending at worst). But no you, crack it half. That's wrong don't do that.
Unless center is "+3db" (0x26) don't call it tweaked, because it ain't.
Everything operates as normal after applying the tweak. If you want bass down -2.5 do it where ever you did it before. If you want center down by 3dB do it as you did before (but try it at zero too).
Your just calibrating the speakers a little higher, that's all, and getting around this artifical cap.
Once you set them positive you can calibrate them as normal (from front panel) but you want as many channels as possible exactly at +3dB regardless of channel.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Sep 2007
Posts: 1,986 Likes: 55
Knows where his towel is
|
|
Knows where his towel is
Joined: Sep 2007
Posts: 1,986 Likes: 55 |
I have a 568 and only use the analogue outputs in a 5.0 set-up. Originally, I had the LCR set to 0dB and the rears level matched to +1.5dB After reading a very old post on levels, I tried setting the levels so no speaker had a positive setting, so LCR set to -3dB and rears set to -1.5dB. After adjusting the normal playback volume by +3 (to get the same relative SPLs) I think it sounds a better, more relaxed and smoother, like there's less distortion. Then again, I couldn't switch between the two set-ups quickly as it requires a Config each time. Maybe it's all in my head? The thing is, technically, reducing the level by a small amount will prevent the possibility of clipping in the digital domain, so my gut feeling is that it should be better. It also completely rid the system of (admittedly rare) pops and clicks when changing sources / muting etc. I don't hear AXIS changes. I don't hear upsampling in G68 (or 861). I don't hear differences in G68 and 861). I don't hear cable differences. I don't hear power conditioner differences. I don't hear a lot of things, like changing dither and bit depth on the 518, maybe the change is so small as to be not important? Maybe my system can't resolve the differences? (welcome to upgrade paranoia) As for hearing the differences between 24 and 23 bit sources, I'm still waiting for any piece of equipment to have a dynamic range of 144dB, a room with 0dB background noise and ears that wont bleed with SPLs over 130dB... Steve.
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
I spent a couple hours last night measuring digital input vs output and it came out completely as expected. Everything is now in the Wiki with wave forms showing before and after. http://www.meridianunplugged.com/wiki/index.php?pagename=How%20to%20obtain%20level%20perfectYou will clip above +3dB. But +3dB is level perfect. I still believe it's fine to run rears a little over +3dB as they don't normally get Full Scale data (especially Trifield). That is your choice. I'm running my rears +5dB and they are staying that way. I would never run a front channel above +3dB. I might try towing my rears out a bit to lower them 2dB, then I could run all 5 channels at +3dB.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Aug 2004
Posts: 38
Harmless
|
|
Harmless
Joined: Aug 2004
Posts: 38 |
Please clear up a small bit of confusion on my part. Am I to understand that the recommended setting of +3db for the front speakers only applies to systems that use DSP speakers, and the recommended level for analog speakers is still -4 (per the wiki)? Or do you believe the +3db setting will yield the same benefits in systems with analog speakers?
2-Channel: Mer 800, Wadia 170i, Ipod, Berkeley DAC, Clayton M300 Amps, Martin Logan Spires Multi-channel: Oppo BDP-83, Mer 800, HD621, Mer 861, Clayton/Rowland/Classe amps, Martin Logan Spires & Stage, Revel Embrace, REL Stentor
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
I don't have analog speakers and I don't believe this applies to analog setups. Calibration is done differently for analog.
But it does not hurt to try it on analog systems.
There have been reports of -5,-4,-3 and 0. And 1 person has recently tried +3.
But THIS thread says +3dB for DSP speakes. I have the charts to show this technically it in the Wiki article not just an ear.
Analog systems may not have this "Problem" to begin with.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument. HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6 Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Sep 2007
Posts: 1,986 Likes: 55
Knows where his towel is
|
|
Knows where his towel is
Joined: Sep 2007
Posts: 1,986 Likes: 55 |
Well my post was regarding my analogue set-up and I'm sticking to -3dB.
Steve.
|
|
|
|
1 members (LeeRankin),
508
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,252
Posts297,444
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|