logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rating: 5
Page 4 of 9 1 2 3 4 5 6 7 8 9
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by Frank
Originally Posted by George Mills
I just went in the MSL file with notepad and set my front 3 speakers to +3db (in hex, the +3db value is 0x26).

I am going to have to add +3db to each of the existing speaker calibration levels in my .msl file. How do I go about calculating the hex value of -0.5db or +2.5db for example.

In the hex conversion calculator I found on the web, it said 0x26 was equal to 38 not 3.

Just note what the current Hex value is and add 1 (in Hex) for each .5 db step you need to shift by.

When you are all done open the file in MConfig and check it. It will display correctly.

I'll add this to opening post.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 2,534
Great Green Arkleseizure
Great Green Arkleseizure
Joined: May 2000
Posts: 2,534
I found something interesting. My "Mono Sub" level is set at 0.0db yet the hex number is 0x2c which is the equivalent of +6.0 db. Does anyone else have this anomaly?


561, DSP5500s, DSP5000C, analog sides and rears
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
I would assume that it may be encoded differently (it may have different range requirements).

I would go by what ever it displays in MConfig and you can also confirm what it displays on the G68 or 861 Front Calibration panel.

You can also verify levels with a meter that everything is ndB higher.

I did all the above and also verified with a Calibration BD disc.

Everything was consistent with the delta I applied in the MSL.

Since I have no sub I can't double check it so you are possibly in new terroritory. So check and cross check everything. I would not be too worried about the value itself as long as everything else checks out as expected.

Subs can be tricky to measure levels though.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Feb 2004
Posts: 1,560
Likes: 1
Working on the ultimate question
Working on the ultimate question
Joined: Feb 2004
Posts: 1,560
Likes: 1
I didn't read this entire thread but did anyone think about bass management? In some cases bass from the rears are summed into the main channels thus the need for 3db headroom in each channel. That's if you run your rears small and bass is redirected to the front main channels. You may have some clipping in movies in those big explosions. If the movie is recorded with the full dynamic range of the bit depth it was recorded with that is. If it all goes to the sub then you are throwing away resolution in the main channels...or there is something in the firmware that auto compensates for this with different speaker setups. Just a thought! It may have been hidden for a reason is my point.

Ron


HT: 568.2mm (Revelation One filter), 518x2, SB3, Bryston 7BSTx3, 8BST, Aerial 10T, CC3, SW12(Qty2) w/SVS AS-EQ1, MK Tripole x4. JVC RS1u, DVDO Duo, Oppo 103 w/Vanity103HD, Sony PS3, VIP 3D Theatre, Acer H5360. Logitech Ultimate Remote and Hub.
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by Ronomy
I didn't read this entire thread but did anyone think about bass management? In some cases bass from the rears are summed into the main channels thus the need for 3db headroom in each channel. That's if you run your rears small and bass is redirected to the front main channels. You may have some clipping in movies in those big explosions. If the movie is recorded with the full dynamic range of the bit depth it was recorded with that is. If it all goes to the sub then you are throwing away resolution in the main channels...or there is something in the firmware that auto compensates for this with different speaker setups. Just a thought! It may have been hidden for a reason is my point.

Ron

Yes that sort of thing has been discussed.

You can also boost rears by +10db in the Cinema preset. And you can boost center by 3db.

I don't think it's a problem but worth noting and keeping an eye on.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Mar 2010
Posts: 147
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2010
Posts: 147
"I don`t know if this is a bug or if the DSP`s will explode if you turn volume up paste 97. But for me it`s running fine so far. I think the worst thing that could happen is something saturates (probably only in extreme conditions)."

Can't you via notepad set a limit on max volume in text edit by -3db to compensate????

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by dr.bill
"I don`t know if this is a bug or if the DSP`s will explode if you turn volume up paste 97. But for me it`s running fine so far. I think the worst thing that could happen is something saturates (probably only in extreme conditions)."

Can't you via notepad set a limit on max volume in text edit by -3db to compensate????

No idea what your saying. By default DSP levels are capped at 0.0. You can basically override that by editting the MSL directly.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Mar 2010
Posts: 147
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2010
Posts: 147
George what I am saying is if there is a worry that above 97 DSPs will explode given your +3db tweak, then why not limit the max volume of the system to say 96 just to be safe?

Also, how do I code this +3db in textedit if my CENTER happens to be -3.0bd in Trifield (0.5+ms center depth) and in PLII MOVIE and CINEMA both CENTER settings are set to 0.0db.

So the idea is how do I add your mod and keep the center the same in relation to the LR across all DSP presets? Is this a manual code all the way through?

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
It was only a joke about 97. In fact Max Volume (in the DSP speaker) is completely independent. You can have digital clipping at any volume.

After putting this tweak in place I got rid of the -3dB on the center in Trifield so that it could be "LevelPerfect" on the center too. I may change it back, but I wanted to try it. So far I like it. I think the added clarity on the Center made the need for -3dB less critical. My front 3 are +3db in calibration and no center attenuation in Trifield. This is only possible if front 3 are reasonably close to begin with.

Another way to do it is put 0x26 for Front Left / Right in MSL. Down load that to G68 and measure level of front Left/Right with an SPL meter (use average of two if they differ any and that as a target level for other channels).

Now keep adjusting all other channels (boosting hex values (by small amounts -e.g. 2 steps say) downloading and testing) until they match the level on front left right. You'll understand the numbers better once you go through trial and error. In the end you should check with meter anyway. Mine all measure 82dB now instead of 75dB.

If you want to keep your center -3dB (in Trifield) you can but I don't believe it will get the benefit of the "tweak". That's a personal choice. It depends on how important you think this tweak is and what you think the cost is of not doing it.

I forgot if you set all other channels (Except subs as Frank discovered) to 0x21 (+0.5dB) and you can use the G68 built in calibration and adjust it until it matches mains. Once you cross 0.0db you can't go back though. Then you can fetch G68 config and save to temp file to see what the hex values are.

If folks decide to compromise levels a bit to get exactly "LevelPerfect" don't let this change in relative levels fool you into thinking it's better or worse. My center was only off by 0.5dB from mains. So I could get away with getting center at +3dB too pretty easily. I compromised center being off +0.5dB. When I remeasured everything it was pretty darn close to equals so I'm not concerned.

Also if you want to compare apples to apples. Listen in Direct mode before making any changes, get familiar with a tune(s). Then make the change just on Left/Right to 0x26 and then listen in Direct again. If you like what your hearing then do the rest. If you don't put it back.

To do the rest just add the same difference you had to add to get mains up to +3dB. If your mains were -2.0dB you have to add 10 to the Hex Value (10 0.5dB steps is +5.0dB) to get to +3.0dB. So add 10 to the hex value of all other channels. Open in MConfig, check if it makes sense. Then download and measure with a meter that they all read the same level. Or close to same level if you compromised a little to reach exactly 3.0dB.

My guess is, if it's not EXACTLY 0x26 there is no benifit to that channel. I don't think it gradually gets better as you approach +3.0dB. But I could be wrong on that.

Also be sure to start with a copy of your original config in case you goof up editing or decide this tweak is not for you.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Mar 2010
Posts: 147
Hitchhiker
Hitchhiker
Offline
Joined: Mar 2010
Posts: 147
George re: "After putting this tweak in place I got rid of the -3dB on the center in Trifield so that it could be "LevelPerfect" on the center too. I may change it back, but I wanted to try it. So far I like it. I think the added clarity on the Center made the need for -3dB less critical. My front 3 are +3db in calibration and no center attenuation in Trifield. This is only possible if front 3 are reasonably close to begin with."

I found it vital to drop the center in Trifield to -3db. If I boost the LR +3.0db and set center at 0.0db it would be a wash, but you then believe there would be discrepancy as LR would gain clarity and center would lag?

What would you say your +3db tweak is on a scale of 1-5 with 5 being night and day improvement?

EDIT: I'll wait for you to figure out the center but I suspect that when you drop it back -3db you may have the preferred Trifield sound.

Joined: Feb 2002
Posts: 8,816
Likes: 87
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: Feb 2002
Posts: 8,816
Likes: 87
George,
I always find that Trifield needs centre adjustment in a new setup. You simply cannot run it without correcting level, depth and (once upon a time) width. If you don't do this then the centre will tend to dominate and you mainly hear only that.
Are you saying that you have your front 3 all set the same level ? Is this giving the sweet Trifield target we know is there ?

Just curious


Rgds,
Nick


Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
It's your ears your system. Do what you want. I can't tell you what music to listen to or what volume to listen at. So I can't tell you if it's worth giving up tweaking Trifield center. I'm just telling you what I did on my center which may or may not change. That's why I said try 2 channels (in direct preset) first to take center out of the equation first and evaluate this tweak on it's own first.

Regarding your last comment Nick. That's why I said try 2 channels first !!!

I was extremely careful doing this. And very careful how I explained this. I tried center both ways.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Page 4 of 9 1 2 3 4 5 6 7 8 9

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
0 members (), 460 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
Ludwig 10
IanP 8
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,249
Posts297,435
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.031s Queries: 39 (0.025s) Memory: 0.6951 MB (Peak: 0.8010 MB) Data Comp: Off Server Time: 2026-11-16 01:07:46 UTC
Valid HTML 5 and Valid CSS