Read my first reply to vk.
I did and I am still confused. It sounds to me as if I shouldn't change the offset but should effect the change by modifying the MSL file to +3db.
I've detailed it as best I can. I think VK and others get where I'm going.
Basically most music servers/CD are FULL SCALE, "BitPerfect" and "LevelPerfect".
I fudged the G68 to be essentially "LevelPerfect" (From Digital in to Digital Out). You had to boost 3db to do so. It's not "LevelPerfect" with calibration level set to 0.
Now that it's "LevelPerfect" I think that snapped something else into place.
This is in the spirit of what Ron found years ago. It may be related it may not be. We may be all crazy. But I think my system has never sounded better.
It may be causing some math to be cleaner or skipped because no offset is being applied to the front 3 now.
Eseentially using MSR remote is Analog !! (not really, but it's as good as analog with Meridian Hybrid special sauce).
Meridian DOES NOT use that Hybrid Special sauce for doing CHANNEL level adjustments in the processor (with DSP Speakers). It only uses it for Master Volume.
It's like turning a 518 down 3db and turning your analog amp (after the DAC) up 3db will NOT produce the same result.
Again Analog may be different or different numbers.