logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rating: 5
Page 2 of 9 1 2 3 4 5 6 7 8 9
Joined: Dec 2000
Posts: 866
Likes: 2
Pan-dimensional being
Pan-dimensional being
Offline
Joined: Dec 2000
Posts: 866
Likes: 2
Originally Posted by George Mills
I keep forgetting if 3db is 1bit or .5 bits.
It is easy to remember if you consider that a CD has 96dB S/N ratio. Obviously 16 bits is 96dB, so 1 bit is 96/16=6dB.

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by VirusKiller
When the 518 clips digitally, you can't hear anything obvious. Certainly not like analogue clipping anyway.

I can believe that especially if it's a small amount.

I wonder if DSP speakers would show it.

Should be able to see it recorded.

Too bad my rears are louder.

The more I think about it the more I think the rears should clip.

I may back them off to +3db until I can measure.

Nothing is gonna break if they clip though.

99% of the time rears or sides are attenuated. They rarely get full scale. But they could.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 2,534
Great Green Arkleseizure
Great Green Arkleseizure
Joined: May 2000
Posts: 2,534
I'm confused. Ronomy found the best offset to be -4.0. Are you saying it should be +3?


561, DSP5500s, DSP5000C, analog sides and rears
Joined: Dec 2000
Posts: 866
Likes: 2
Pan-dimensional being
Pan-dimensional being
Offline
Joined: Dec 2000
Posts: 866
Likes: 2
Originally Posted by VirusKiller
When the 518 clips digitally, you can't hear anything obvious. Certainly not like analogue clipping anyway.
To me clipping sounds like there is something wrong with the sound. Not that you immediately know it is clipping, but there is just something not quite right.

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by Frank
I'm confused. Ronomy found the best offset to be -4.0. Are you saying it should be +3?

Read my first reply to vk.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: Feb 2002
Posts: 8,816
Likes: 87
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: Feb 2002
Posts: 8,816
Likes: 87
George,
it's the middle of your night...is this keeping you up wink


Rgds,
Nick


Joined: Apr 2004
Posts: 2,492
Senior Shouting Officer
Senior Shouting Officer
Joined: Apr 2004
Posts: 2,492
Interesting observations. A 6-7db difference between digital and analogue systems is quite a lot. I wonder if it's an analogue-digital difference or a 500-G series one? Perhaps it's time for us analogue guys to appraise our G68 with various off sets?

Cliff


Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
Joined: Aug 2002
Posts: 4,579
Likes: 25
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: Aug 2002
Posts: 4,579
Likes: 25
George, this is an excellent piece of work...thanks for your keen research instincts!

I do wonder if that 3db loss via the processors is for bass management purposes with movies. M have always been very guarded about that, and prior discussions (a long while back) did lead me to believe that this factor, as much as anything else, is part of what they themselves would regard as the "special sauce".

Intriguing to know that you can remove this offset, and I'm very interested to hear what you think with movies. I'd be very happy to run with the proper 0dB level if it was doable without risk to any other parts of the system.

Interestingly, my own recollection was that Ronomy always advocated a 3dB reduction, not 4dB? Maybe I'm hazy on that.

Re the 518, a 3dB loss definitely sucked a bit of life out of proceedings compared to 0dB, or indeed the life added by +3dB (on quietly mastered old CDs). IIRC, in the 518 manual, Bob's favoured settings were "emphasis" and 2-3dB reduction in gain to offset the bost which emphasis provided. He noted that this gave additional subjective resolution, resulting in a perceived 19 bits performance.

Your findings could point to the aspects of the 518 which were incorporated into every subsequent processor's DSP settings (although I always felt that Shape C was the closest sounding dither).

In any case, you've done a cracking job George....many thanks.

Cheers

George

Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by Mr Meridian
George, this is an excellent piece of work...thanks for your keen research instincts!

I do wonder if that 3db loss via the processors is for bass management purposes with movies. M have always been very guarded about that, and prior discussions (a long while back) did lead me to believe that this factor, as much as anything else, is part of what they themselves would regard as the "special sauce".

Intriguing to know that you can remove this offset, and I'm very interested to hear what you think with movies. I'd be very happy to run with the proper 0dB level if it was doable without risk to any other parts of the system.

Interestingly, my own recollection was that Ronomy always advocated a 3dB reduction, not 4dB? Maybe I'm hazy on that.

Re the 518, a 3dB loss definitely sucked a bit of life out of proceedings compared to 0dB, or indeed the life added by +3dB (on quietly mastered old CDs). IIRC, in the 518 manual, Bob's favoured settings were "emphasis" and 2-3dB reduction in gain to offset the bost which emphasis provided. He noted that this gave additional subjective resolution, resulting in a perceived 19 bits performance.

Your findings could point to the aspects of the 518 which were incorporated into every subsequent processor's DSP settings (although I always felt that Shape C was the closest sounding dither).

In any case, you've done a cracking job George....many thanks.

Cheers

George

That's good to know about the effects of 3db in the 518.

You may be right about Ronomy's being -3db or -4db. I'm fuzzy on that too.

I really think the risks are very low, but I'm covering my a$$.

I think it's safe, especially at +3db because like VK found they need headroom for boosting center. It's no different than running 0 calibration with center +3db vs +3db calibration and center 0 !!

I just thumbed through Presets.

Looking at Cinema (which can have full scale to each channel), likewise it allows center to go up +3db. But the rears it allows +10db !!!

I think it's safe. Just don't go boosting rears and center in the presets.

I hope someone is brave enough to try it and confirm it.

Curious what a 861V4 does but I highly expect it's exactly the same.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 2,534
Great Green Arkleseizure
Great Green Arkleseizure
Joined: May 2000
Posts: 2,534
Originally Posted by George Mills
Read my first reply to vk.
I did and I am still confused. It sounds to me as if I shouldn't change the offset but should effect the change by modifying the MSL file to +3db.


561, DSP5500s, DSP5000C, analog sides and rears
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Originally Posted by Frank
Originally Posted by George Mills
Read my first reply to vk.
I did and I am still confused. It sounds to me as if I shouldn't change the offset but should effect the change by modifying the MSL file to +3db.

I've detailed it as best I can. I think VK and others get where I'm going.

Basically most music servers/CD are FULL SCALE, "BitPerfect" and "LevelPerfect".

I fudged the G68 to be essentially "LevelPerfect" (From Digital in to Digital Out). You had to boost 3db to do so. It's not "LevelPerfect" with calibration level set to 0.

Now that it's "LevelPerfect" I think that snapped something else into place.

This is in the spirit of what Ron found years ago. It may be related it may not be. We may be all crazy. But I think my system has never sounded better.

It may be causing some math to be cleaner or skipped because no offset is being applied to the front 3 now.

Eseentially using MSR remote is Analog !! (not really, but it's as good as analog with Meridian Hybrid special sauce).

Meridian DOES NOT use that Hybrid Special sauce for doing CHANNEL level adjustments in the processor (with DSP Speakers). It only uses it for Master Volume.

It's like turning a 518 down 3db and turning your analog amp (after the DAC) up 3db will NOT produce the same result.

Again Analog may be different or different numbers.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Joined: May 2000
Posts: 8,364
Likes: 14
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364
Likes: 14
Hey I just noticed you can adjust the calibration levels even on the positive side from the Front panel of G68. I can go up or down. Until I hit 0.0 then it won't allow crossing 0.0 back to the positive side again.

Someone must have an If == 0 instead >= 0 do not past go.

I wanted verify if this was possibly a Mconfig bug and see if the firmware enforces it. It does but it's enforcement is weak.


- Fiddler (IMHO)

If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
Page 2 of 9 1 2 3 4 5 6 7 8 9

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
1 members (Els), 403 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
Ludwig 10
Top Posters
VirusKiller 12,733
ncpl 8,816
Carl 8,506
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,249
Posts297,435
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.12 Page Time: 0.038s Queries: 39 (0.032s) Memory: 0.6925 MB (Peak: 0.7962 MB) Data Comp: Off Server Time: 2026-11-16 00:55:00 UTC
Valid HTML 5 and Valid CSS