Originally Posted by mrmarbach
So rather than connecting them all on the same SPDIF line and using the built in matched crossovers on the D1500, you suggest connecting them to the 568.2MM so that you can use the bass management in the 568, correct?
Correct.

Quote
Can the 568 be set to provide exactly the same crossover as the built in D33 crossover on the D1500?
Yep. There is a single crossover in the 568 per bass management layout. Remember that in using the 568, you are using a single crossover (unlike trying to meld together two speakers using multiple crossovers) and the 568 will ensure that that the bass is split correctly at the crossover to the DSP33s and sub(s), with no missing bass or bass bumps and with the correct phase. As long as you have set up the correct relative volumes of DSP33s and sub(s) of course. The 568 almost certainly has a higher quality digital crossover and may have a higher order crossover too.


Roon Developer and ex-moderator of this Forum
I am #25 in the HH1 photo of fame.