Originally Posted by robert.w
Carl
this is allready implemended:
Height channels
Low standby - is 2.5 Watt not low enough ?

Whats wrong with the 800 cases & display?
What you want improve with MRC besides automatic calibration?
What do you mean with "Removal of analogue switching"-do you mean the HDMI upgrade, so you can go over HD621?

The other points I agree with you.
The mc config fetch back should work on 800/861-

Hi Robert,
I just checked in M-Config and the 861 does support two height channels, as apposed the G68 which does not. There are some new codecs that support discrete height channels, but I take on board VK's point on the current catalogue.

If the standby on an 861 is only 2.5 Watts that's good enough for me, but the EC wants it down to only 1 Watt. I`ll have to dig out my multi-meter and measure all my AV kit and post results.

Personal, I`m happy with the 800 series cases and the display for the matter.
However, some on here have made comments though. What I would like is a better remote. I think a fully integrated Meridian-Sooloos compact tablet controller with WiFi and battery powered would be very cool.

Improved MRC, may be a calibrated (digital) mic, to remove the dependence on 3rd party SPL meters and enable a better S/N ratio to be obtained. Some new M-Magic in algorithms, improved.

Removal of analogue video switching; video is digital now a days, I`m suggesting that M should consider removing analogue video switching and processing from it processors.

May be M should improve their 2k digital video scalers?

I don`t understand your comment on “mc config fetch back should work …” with respect to my original post.

Trust this helps,
Carl.

861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)