Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Topic Options
Rate This Topic
#271415 - 2018-01-04 20:02 Considering DSP5200 / replacing DSP5000 as part of an M system overhaul
Registered: 2006-03-22
Posts: 155
Stevo Online content
Hitchhiker
Stevo Online content
Hitchhiker

Registered: 2006-03-22
Posts: 155
Loc: Winchester, Hampshire, UK
Hi all,

I've been away from the forum for a few years - mainly as domestic limitations have meant that the system hasn't been in much use - but it's back up and running now and enjoyed very much. I was thinking of a speaker update to (second hand) 5200s - partly for performance and partly for aesthetics,

Currently:

- DSP5000 orig 24/96 8-segment
- Sources 500v3 CD, Sonos Connect
- Both running through 518 and 568.2mm (also have a 562 but not using it)

First thought > DSP5200s

- Is there much a jump from my 5000s?
- Is there much difference between the versions - original / SpeakerLink / other versions? (not SE - assuming out of my price range.)
- I like the idea of a later spec/version/tech for obvious reasons. But what is needed to connect to SpeakerLink? I looked at the Reviver but seems to be SpeakerLink into old DSP inputs rather than the other way around.
- I prefer the gloss paint finishes to the timber finishes, if that affects which version I should be looking for.

Second thought > with later 5200s would I need the 518 and 568.2mm any more? They were a worthwhile improvement with the 5000s but do the 5200s incorporate some of the processing they do? In which case I can sell them and put towards the speakers of course.

All thoughts and experience welcome!

Cheers,
Stephen


518, 568.2mm, DSP5000 (24/96 8-segment), 500v3 CD, Sonos Connect
Top
#271417 - 2018-01-04 20:59 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Stevo]
Registered: 2008-10-11
Posts: 292
Tarik Online content
Hitchhiker
Tarik Online content
Hitchhiker

Registered: 2008-10-11
Posts: 292
Loc: Gloucestershire, UK
If you haven't already had it done, I would recommend refreshing the electrolytic capacitors on the amp section of the DSP5000s and give them another listen.

Also check the resistors at the same time.

The wood veneer finish on the DSP5200 was not available with SpeakerLink connections.

The 518 can be useful in some systems to change the gain of the signal for example from a TV.


Lounge: DSP5000 24/96, 518, C61R

Top
#271418 - 2018-01-04 21:15 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Stevo]
Registered: 2009-11-10
Posts: 1,162
CMB Integrations - Bruce Online content
Meridian Partner Pan-dimensional being
CMB Integrations - Bruce Online content
Meridian Partner
Pan-dimensional being

Registered: 2009-11-10
Posts: 1,162
Loc: Lexington, South Carolina, USA
Biggest benefit of the 5200 will be much newer electronics and in my opinion a more modern look. If your sources are only the two you list, you could get away without the 568.


www.cmbintegrations.com

Personal System #1 Theta Digital Cassablanca 4, 818v3, 218, DSP8000.2SE, DSP7200SEHC, Boston Acoustics Lynnfield 500L series 2, Monitor Audio Silver 10, ATI 200WX5 Amp, JVC RS15, Black Diamond Zero Edge screen. QNAP TS-251 3TB
Personal System #2 F80.

Crestron control and multi room audio via Meridian 258 amplifiers.
Top
#271424 - 2018-01-05 07:33 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: CMB Integrations - Bruce]
Registered: 2011-08-22
Posts: 1,503
Not'arf Online content
Working on the ultimate question
Not'arf Online content
Working on the ultimate question

Registered: 2011-08-22
Posts: 1,503
Loc: Abruzzo, Italy
I haven't compared 5000s with 5200s but from what I've read on here, the improvement in SQ is modest, at best.


Audio: MC200, G61R SL, HD621, DSP5500, 5000C, DSP3100. Subs: 2 x REL G2.
Video: JVC X70, Black Diamond Zero Edge screen 129"(2.35).

Meridian owner since 1998
Top
#271425 - 2018-01-05 07:52 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Not'arf]
Registered: 2004-08-07
Posts: 7,348
Ian Online content
President of the Imperial Galactic Government
Ian Online content
President of the Imperial Galactic Government

Registered: 2004-08-07
Posts: 7,348
Loc: Surrey, England, UK
I went from DSP33/1500 to 5200's to 5000's.

Big jump up from 33 to 5200, although location was quite different and my last recollection of 33's was without the 1500 in the loop, so probably not as much as it seemed at the time.

The move from 5200 back to 5000 was subtle, even though the 5200 had the apodising filter. It was a straight swap with the guy I got the 5ks from, he got my 5200's. He was new to Meridian and I understand he didn't keep the 5200's for long. I don't regret the swap as I got a good cash balance in the bargain.

Biggest difference between 5k and 5.2k is that 5.2k's upsample and apodise, 96/24 5k's only output what they receive. So if no processor, and using a 44/48k source like Sonos, 5200's would upsample/apodise up to 96/24.

Personally I also got paranoid about damaging the high gloss finish on the 5200's when we had visitors as they were quite vulnerable in free space - the 5000's were past their best already so less of a worry. The last straw was a visitor using a 5200 as a drinks coaster...


Meridian owner since 1992
DSP5000 96/24, MC200, Prime & PSU, Focal Elear, Explorer 1 & 2, F80, 200/203 and various Sonos.
Top
#271427 - 2018-01-05 08:23 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Ian]
Registered: 2013-12-31
Posts: 317
LeeRankin Online content
Hitchhiker
LeeRankin Online content
Hitchhiker

Registered: 2013-12-31
Posts: 317
Loc: Newcastle upon Tyne, UK
Let's not forget EBA and the ability to upgrade to SE with the SpeakerLink versions of the 5200.

I love mine, I know it's down to personal preference but the aesthetics are a major draw in my opinion, they just look gorgeous.

Lee


1. 568.1, M33c, Beolab 6000, Fujitsu Q520 HTPC (Kodi Jarvis), Samsung KS7000 55, Sony BluRay
2. AC200, DSP5200SL, Squeezebox Touch, Rega Planer 2, Ortofon red
3. Lenovo Thinkpad, Prime, Prime Power Supply, Explorer2, Sennheiser HD700 cans, Shure SE425 buds
Top
#271430 - 2018-01-05 09:03 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Ian]
Registered: 2016-05-04
Posts: 89
Ogri Offline
Hitchhiker
Ogri Offline
Hitchhiker

Registered: 2016-05-04
Posts: 89
Loc: London, UK
Add a £400 AC200 for upsampling and preamp to 5ks, Bob’s your uncle!

Top
#271486 - 2018-01-06 16:56 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Stevo]
Registered: 2015-12-20
Posts: 50
Clever_And_Simple_Peter Offline
Meridian Partner Mostly harmless
Clever_And_Simple_Peter Offline
Meridian Partner
Mostly harmless

Registered: 2015-12-20
Posts: 50
Loc: South West London, UK
Originally Posted By Stevo
- I like the idea of a later spec/version/tech for obvious reasons. But what is needed to connect to SpeakerLink? I looked at the Reviver but seems to be SpeakerLink into old DSP inputs rather than the other way around.
The SpeakerLink versions of the DSP5200 have a BNC connector and phono connector as well as the SpeakerLink Connection.

The phono connector can be used for your 568.2mm. You can then use a BNC to DIN convertor cable to handle the comms from the 568.2mm to the DSP5200s. : )


Clever & Simple
Meridian Dealer In South West London
for my personal account please see PeterRW
Top
#271659 - 2018-01-10 22:20 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Ogri]
Registered: 2006-03-22
Posts: 155
Stevo Online content
Hitchhiker
Stevo Online content
Hitchhiker

Registered: 2006-03-22
Posts: 155
Loc: Winchester, Hampshire, UK
Thanks, all. Appreciate the input. The 5000s sound fantastic so I’m not expecting a major change, but the aesthetics of the 5200 are a big draw for me the more I think about it.

I think the SL version is a no-brainer, having dug around a bit more and read about EBA which I wasn’t aware of. Didn’t know about the .2s either, but guess there’s not many of those around s/h yet.

So time to start hunting, although there seems to be a steady stream of them on eBay if not here for some reason.

Originally Posted By Ogri
Add a £400 AC200 for upsampling and preamp to 5ks, Bob’s your uncle!
Ah I hadn’t thought of one of these. Not what you had in mind, but this would give me SL to the speakers, and replace the 568, also doing the FIFO as far as I can see.

Is £400 the usual s/h value I presume?

So I’d end up with 500/Sonos > AC200 > 5200SL/5200.2...

A sensible move / anything I’ve missed?

Cheers,
S




518, 568.2mm, DSP5000 (24/96 8-segment), 500v3 CD, Sonos Connect
Top
#271661 - 2018-01-10 22:35 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Stevo]
Registered: 2013-12-31
Posts: 317
LeeRankin Online content
Hitchhiker
LeeRankin Online content
Hitchhiker

Registered: 2013-12-31
Posts: 317
Loc: Newcastle upon Tyne, UK
That's precisely what i did Stevo, it's a great combo, albeit I feed via squeezebox. If only the headphone out was decent it would have been a great all in one.

Look out for items via Reuben on eBay, my 5200sl were acquired from him. He is a first class 2nd hand dealer who used to frequent this parish. His goods are always in tip top order and he will personally deliver and set them up for you....a real gent.

You won't look back I'm sure.

Lee


1. 568.1, M33c, Beolab 6000, Fujitsu Q520 HTPC (Kodi Jarvis), Samsung KS7000 55, Sony BluRay
2. AC200, DSP5200SL, Squeezebox Touch, Rega Planer 2, Ortofon red
3. Lenovo Thinkpad, Prime, Prime Power Supply, Explorer2, Sennheiser HD700 cans, Shure SE425 buds
Top
#271720 - 2018-01-12 09:06 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: LeeRankin]
Registered: 2007-09-01
Posts: 335
Cmr600 Offline
Hitchhiker
Cmr600 Offline
Hitchhiker

Registered: 2007-09-01
Posts: 335
Loc: Nairobi, Kenya
I did 15 years (ish) with 5000 and a simple 200 transport, then went to 5200's (original SL ones). I never got on with them. They just didn't work for me. Then stuck 200 upgrade to C15 and still didn't really fly.

I hear awesome things about the SE versions but I never got on with 5200's. Trouble was I'd flogged the 5000's then and ended up selling a kidney and getting 7200.2's...

C


M Customer since 1991...

M Kit: 861v8+ID41, 8000SE's, 7200HCSE, HD621, Explorer 2, AD88

Non M Kit: 27inch Roon Touchscreen (Lenovo), QNAP TVS-871-i7-16G 8 Bay NAS, Philips 4k Ambilight TV, Hue Lighting System, TiVO, PS3, ATV (v.4) Shure SE846 Headphones & a whole lot of Apple stuff...
Top
#271723 - 2018-01-12 09:56 Re: Considering DSP5200 / replacing DSP5000 as part of an M system overhaul [Re: Stevo]
Registered: 2017-01-20
Posts: 7
James_L Offline
Harmless
James_L Offline
Harmless

Registered: 2017-01-20
Posts: 7
Loc: New Forest, England
I'm thinking of changing for the opposite reason. My 5200s are hidden behind an acoustic cinema screen - seems like a waste!


568.2MM, DSP5200, DSP50000C, M33 x 4
Top

Moderator:  Carl, Duncs, ncpl 
Who's Online
5 registered (Gparrington, Nstzya, GMS, Hector, Stevo), 34 Guests and 0 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
AndrewE, Obe, PaulRP0, Zetetic, CJWessing
4573 Registered Users
Top Posters (30 Days)
Ratbert 66
CMB Integrations - Bruce 53
_M_ 49
Ian 36
VirusKiller 36
Top Posters
VirusKiller 12230
Fiddler 8664
ncpl 8352
Carl 7563
Ian 7348
Forum Stats
4,573 Registered Members
17 Forums
24,338 Topics
250,151 Posts

Most users ever online: 211 @ 2015-05-05 14:40
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant